Extend the life of the high-pressure hose connector approach

Extend the life of the high-pressure hose connector approach.
High and low pressure hydraulic hose assemblies are required stripping outer plastic and rubber without stripping the outer two types, along with the joint is not the same need to peel the outer groove glue joint cover type should not be too sharp, otherwise it will damage the enhancement layer hydraulic hose clamps. Correct withhold joints, safe and normal operation of the high and low pressure hose connector assembly is essential. Many types of high and low pressure hose connector, and to select the appropriate connector, then set design for a standard, reasonable, sharp grooves, non-standard size will be deducted off the steel wire reinforced layer. Withhold withhold joints should be determined based on the amount of inner diameter and outer diameter of the hose.