Extend the life of the high-pressure hose connector approach

Extend the life of the high-pressure hose connector approach.
High and low pressure hydraulic hose assemblies are required stripping outer plastic and rubber without stripping the outer two types, along with the joint is not the same need to peel the outer groove glue joint cover type should not be too sharp, otherwise it will damage the enhancement layer hydraulic hose clamps. Correct withhold joints, safe and normal operation of the high and low pressure hose connector assembly is essential. Many types of high and low pressure hose connector, and to select the appropriate connector, then set design for a standard, reasonable, sharp grooves, non-standard size will be deducted off the steel wire reinforced layer. Withhold withhold joints should be determined based on the amount of inner diameter and outer diameter of the hose.

Varieties There are many types of hydraulic ferrule fittings

Varieties There are many types of hydraulic ferrule fittings, give us today to share product is soft rubber joints, though, and the type of hose are different, but it is a no tools will be able to achieve rapid connect or disconnect the piping joints .
The types of products leverages the rubber elasticity, high air tightness, chemical resistance, weatherability and resistance to radiation and other characteristics, high strength, strong cold bias stability with the composite polyester tire cord fabric, After the high-pressure, high-temperature mold vulcanization.
1. Environmental protection: quick connectors and connection broken, the oil spill will not leak, you can protect the environment.
2. Economic: a variety of advantages over ferrule pipe fittings are for customers to create economic value.
3. The time-saving: When connected via a linker to split off and the oil, simple operation, saving time and manpower.
4. fuel: The broken oil line, individual valve can be closed on the connector circuit, the oil will not flow, which can effectively prevent the loss of oil pressure of the oil.

DGJ from solid metal hose connectors

DGJ from solid metal hose connectors, can not threaded or non-threaded pipe device outlet port and hose connections, save the threading process. Metal joints made of zinc alloy die-casting, zinc plated, brushed or chrome; compact, high strength. Steel and Interlock Hose Fittings connection is reliable, beautiful appearance. This metal connector is self-retaining type for the metal hose pipe on top of the non-threaded or non-threaded device outlet port. Adapter 60 Cone seal hose fitting: JS type, JSH type, JSB type, JSHG type. Adaptation steel: thin steel wire tube, black, galvanized iron pipe (water, gas pipes).

The length of the high-pressure hose

Hose cutter that is, depending on the length of the high-pressure hose hose cut off, and then finish with a hydraulic cutting machine with a crimping machine after stripping the plastic inner core and jacket, hose crimping together, after washing, pressure (1.5 times the rated pressure hose static pressure test) completed a hose assembly production, hose cutting machines played a crucial role in the production of hose assembly process. I through the characteristics of domestic and foreign flat seal metric hydraulic fittings of cutting machines to do a full investigation and the use of the current domestic and foreign production of hose cutting machines with manual, and other types of power-driven form of foot and under the pressure of pneumatic and pneumatic propulsion, in the advantage of using a variety of pneumatic propulsion drive form feed hose cutter most prominent, pneumatic propulsion unaffected feed hose cutting length, the German production and domestic Kangmai hydraulic equipment company produces cutting machine

Metallic hose fittings is a very important project

The selection of suitable JR-2 type rectangle metallic hose fittings is a very important project, a good reusable hydraulic hose fittings and fittings will not only allow you very much worry, and effort, but also cheaper. Next, small series introduced following several criteria selected type JR-2 rectangular metal hose.
1, the type of liquid and temperature, different liquids to choose the type of liquid according to the temperature and the body material of metal hose.
2. Select the key metal flexible joint pressure of the liquid, and therefore different pressures when the liquid must choose strong pressure resistance of the joint.
3, to determine the size and shape of the installation before ordering products.
4, JR-2 type rectangle wire spiral hose structure is different in different environment which, combined with temperature, humidity, and dust conditions, to choose the type of joint, the body materials and seal materials and so on.
5, the structure of the valve, there are two, one is the automatic switch valve, a one-way switching, so the choice to select a valve constructed in accordance with different connectors.

Manifold design and specifications

The hydraulic manifold block design process, always follow one design philosophy is to minimize the weight to get the manifold hydraulic elements are arranged to maximize and optimize system performance. In the context of rising raw material prices, the design process must be considered at the lowest cost to maximize the economic benefits, of course, designed to meet the design requirements and functional conditions as much as possible to save material and costs.
Manifold block design specifications related to several aspects: including reasonable overall layout, to meet the safety requirements of the equipment and turn toward the pipe; pay attention to safe passage channel spacing, to prevent cross-communication distance is too small; pay attention to the safety of hydraulic components, turn characteristics, to prevent mutual interference.